4axis Rotary Tilting Tables
Multiple Workpieces-RD Series
RD140T3
Specifications
| ITEM | UNIT | RD140T3 | |||
|---|---|---|---|---|---|
| Table diameter | mm | Ø140 | |||
| Table center Height | mm | 140 | |||
| Datum hole | mm | Ø35H7 | |||
| Through-hole | mm | Ø15H7 | |||
| T-slot on table | mm | 12H7 | |||
| Datum positioning key | mm | 18h7 | |||
| Servo motor (Option) | FANUC | α iF8 | Motor interface □130 |
||
| Mitsubishi | 1FK7063 | ||||
| Siemens | HF-154T | □126 | |||
| Heidenhain | QSY116J | □116 | |||
| Total reduction ratio | -- | 30 | |||
| Allowable cutting torque | kg-m | 20 | |||
| Max. rpm | rpm | 100 | |||
| Clamp power source | -- | Pneumatic/Hydraulic | |||
| Clamp pressure | kg/cm² | 6/35 | |||
| Clamp torque | kg-m | 9/20 | |||
| Index accuracy | sec | 25 | |||
| Repetition accuracy | sec | 7 | |||
| Allowable work-piece load | Level (kg) | 60 | |||
| Vertical (kg) | 120 | ||||
| ITEM | UNIT | RD140T2 | |||
|---|---|---|---|---|---|
| Table diameter | mm | Ø140 | |||
| Table center Height | mm | 140 | |||
| Datum hole | mm | Ø35H7 | |||
| Through-hole | mm | Ø15H7 | |||
| T-slot on table | mm | 12H7 | |||
| Datum positioning key | mm | 18h7 | |||
| Servo motor (Option) | FANUC | α iF8 | Motor interface □130 |
||
| Mitsubishi | 1FK7063 | ||||
| Siemens | HF-154T | □126 | |||
| Heidenhain | QSY116J | □116 | |||
| Total reduction ratio | -- | 30 | |||
| Allowable cutting torque | kg-m | 20 | |||
| Max. rpm | rpm | 100 | |||
| Clamp power source | -- | Pneumatic/Hydraulic | |||
| Clamp pressure | kg/cm² | 6/35 | |||
| Clamp torque | kg-m | 9/20 | |||
| Index accuracy | sec | 25 | |||
| Repetition accuracy | sec | 7 | |||
| Allowable work-piece load | Level (kg) | 60 | |||
| Vertical (kg) | 120 | ||||
| ITEM | UNIT | RD140T4 | |||
|---|---|---|---|---|---|
| Table diameter | mm | Ø140 | |||
| Table center Height | mm | 140 | |||
| Datum hole | mm | Ø35H7 | |||
| Through-hole | mm | Ø15H7 | |||
| T-slot on table | mm | 12H7 | |||
| Datum positioning key | mm | 18h7 | |||
| Servo motor (Option) | FANUC | α iF8 | Motor interface □130 |
||
| Mitsubishi | 1FK7063 | ||||
| Siemens | HF-154T | □126 | |||
| Heidenhain | QSY116J | □116 | |||
| Total reduction ratio | -- | 30 | |||
| Allowable cutting torque | kg-m | 20 | |||
| Max. rpm | rpm | 100 | |||
| Clamp power source | -- | Pneumatic/Hydraulic | |||
| Clamp pressure | kg/cm² | 6/35 | |||
| Clamp torque | kg-m | 9/20 | |||
| Index accuracy | sec | 25 | |||
| Repetition accuracy | sec | 7 | |||
| Allowable work-piece load | Level (kg) | 60 | |||
| Vertical (kg) | 120 | ||||
Size Drawings
RD140T3
More 4axis Rotary Tilting Tables
Need Inquire ?
If you need more information or quotation about this product, Our sales representative will reply as soon as possible